Timer Setting - ALPATEC R 11 CR Notice D'utilisation

notice R 11 CR.qxp:notice RI 811 T 14/11/11 16:36 Page 13
FAN MODE SETTING:
- Press Mode touch (E) to select the desired mode, and adjust mode as shown:
Normal mode → Random mode → Sleep mode → Normal mode
Normal mode : fan speed is continuous.
Random mode : fan speed change automatically from high speed, to medium speed to low speed.
Sleep mode : fan speed change automatically like a soft breeze .
COOLING:
- Press Cooling touch (B) to activate cooling function.
Note: light indicator flashes if there is no water in water tank.
The product must be operate with a door or window open.
When ambient temperature will be between 20°C and 40°C, appliance will function with efficiency.
In summer, take care to have clean and clear water in the tank.
If temperatures are hot, you can use ice-box to cool the water in the tank. Put it before in the frozen
compartiment of fridge until became freeze then put it into the water tank.
In winter, when ambient temperature is about 0° C, it is necessary to empty water tank after using.
Press again cooling touch to stop this function.
OSCILLATION:
- Press Oscillation touch (D), to start oscilation of the louvers.
You can change vertical wind direction manually at any time.
- Press Oscillation touch again, to stop oscillation.

TIMER SETTING:

Press Timer touch (A) to activate timer. Press several times to choose your desired time, from 30 min to
7 h 30.
The appliance will stop when selected time is done.
To cancel the timer, press (A) touch until all relevant LED are off.
IONIZER SETTING:
- Press Ions touch (C) to activate ionization function.
By generating negative ions, the ionizer function allows to restore air electric balance ang gives a
well-being sensation.
- Press again Ions touch to stop ionizer function.
13