Tl-500 Set - AREX TL-300 Mode D'emploi

TL-500 Set with BS-500 USB receiver
The TL-500 system contains an autonomous BS-500 USB receiver.
During the time the computer is not on, this receiver saves all incoming
data in a flash memory. For the power supply, an external net adapter
is needed (not included).
If the PC is turned on again, all data which has been saved in the BS-
500 memory, will automatically be sent to the PC.
DC connector
5Volt / 200mA
USB connector
Green LED lighten
when sensor signal is received.
Yellow LED lighten when sensor data has been saved in the memory.
The BS-500 also contains a signal intensity indicator. This way it beco-
mes clear what the signal strength of the sensors is.
Signalstrength