Publicité
Les langues disponibles
Les langues disponibles
Change between the functions
AUX
•
Connect any external music or media player (CD/MP3 player, smartphone, laptop, computer or simi-
lar) to the Aux input (8) of the BOOMBOX via a 3.5mm audio cable.
•
Use the external player as you are used to. Do, however, not forget to turn the volume up.
Radio
•
Press MODE to select the tuner function.
•
Extend the antenna to its full length to gain the best possible reception.
•
Tune in any desired station by pressing the arrow buttons or PLAY/PAUSE for an automatic scan.
•
Automatic scan: Press
P01 after finishing the scan. Press
automatically store 30 stations.
USB/SD
•
Switch to the USB or SD mode using MODE. Connect any suitable USB volume (USB stick, MP3 player,
USB hard drive or similar) or a SD card respectively.
•
You can conveniently navigate through your music library in the conventional way, using
/
analoguos to the way you would use a CD volume.
Please note: Do not use any USB extension cables for connecting the USB bar as this may cause
harmful interference
Remote Control
MODE
USB/SD, Radio, AUX
BACK
PLAY / PAUSE
NEXT
SD Slot
to start an automatic station scan. The unit will start to broadcast the
/
The RC holds a few additional functions: Choose REPEAT for reapeating the
current playing track (in SD or USB modes), EQ for equalizer presets, MUTE
to mute the audio output or CLOCK to set the clock.
Press CLOCK to show the time. Press and hold to set. First set the hour, then
press CLOCK and set the minutes. The time is saved, after you press CLOCK
again.
MODE:
/
EQ
VOL- / VOL+ Change the volume
0 - 9
SCN/RPT
CLOCK
1
6
AUX / DC5V
2
7
ON/OFF
3
8
Volume Control
4
9
USB Slot
5
10
Headphone Jack
to choose the next programmed station. The radio will
Power on/off
Choose the operating mode (USB/SD/FM/AUX)
Mute
Play/Pause
Next / Back
Equalizer
Num pad
Scan for stations / Repeat currently playing title
Show clock (press short) / Set time (hold)
and
7
Publicité
