auna UltraSonic Pulse V6-40 Mode D'emploi page 17

Microphone echo adjustment
MICROPHONE ECHO ADJUSTMENT
Rotate the ECHO knob on unit to increase or decrease the microphone echo
effect that best matches the style.
Flash light
When the unit is on, there will be blue light around the speaker, press the
LIGHT button once, the blue light flash along with the music rhythm. To
disable the disco light, press the LIGHT button on unit until the display
shows "OFF".
USB operation
This unit provides two USB port for music playback.
1. Press the FUNCTION button on unit to select "USB" mode.
2. Connect the USB memory stick to the USB port found on the front of the
unit. Playback will start automatically from Track 1.
3. To pause playback, press the PLAY/PAUSE/PAIR/SCAN button on unit.
The current track No. and P will show on the display.
4. To resume playback, press the PLAY/PAUSE/PAIR/SCAN button again
5. To select a desired track, press the
playing until the desired track appears on the display. The unit will start
play automatically.
6. To search for a particular passage during playback, press and hold the
or button to scan the current playing track at high speed until desired
point (passage) appears, then release the button for normal playback
mode.
7. To select a song which track number exceeds 10, press the
FOLDER/10/M. + button or FOLDER/10/M. - button each time to skip
forward/backward 10 tracks, then press the
desired track.
8. To select a desired folder (if the USB contains more than one folder),
press and hold the FOLDER/10/M. + or FOLDER/10/M. - button each
time to skip forward/backward a folder, then press the
to select desired track.
Important note: The USB port is for data transfer only. Other devices cannot
be used via this USB connection. The use of a USB extension cable is not
recommended.
Repeat play
You can play one track or all tracks on the USB repeatedly
Repeat a single track
or , button respectively during
 
or button to select
 

or button

EN
17