SilverCrest SGKT 50 A1 Manuel D'utilisation page 173

Speed dialling
You can use the three speed dial buttons [21] for phone numbers that you call frequently.
Saving a number for speed dial
To save a new speed dial number to a speed dial button, proceed as follows:

Press any of the speed dial buttons M1, M2 or M3 [21] to which you wish to save the
speed dial number. As there was no entry set previously, "EMPTY" appears on the
display.

Press the Menu/OK button [15].

"NEW ENTRY" will appear on the display [17]. Press the Menu/OK button [15] again.

"NAME ?" will appear on the display [17]. Next enter the name you want via the
numeric buttons [24]. Press the
the Menu/OK button [15] to save the name.

"NUMBER?" will appear on the display [17]. Next enter the corresponding telephone
number via the numeric buttons [24]. Press the
digit. Press the Menu/OK button [15] to save the phone number.

A confirmation beep will sound and the "SAVED" message will appear for a few
seconds on the display [17].
Speed dial
To call a speed dial number, proceed as follows:

Press any of the speed dial buttons M1, M2 or M3 [21] that you want to call. The name
will appear on the display [17].

Pick up the receiver to call the speed dial number.

Put down the receiver to end the call.
If you pick up the receiver first and then press any of the speed dial buttons M1,
M2 or M3 [21], the speed dial number is called automatically.
button [26] to erase any mistyped character. Press
button [26] to erase any mistyped
SilverCrest SGKT 50 A1
English - 171