Publicité
Les langues disponibles
Les langues disponibles
SilverCrest SGKT 50 A1
Intercom and conference calls
Press the ESC/INT button on the multifunction control [4] during an external call. "INTERNAL" will
appear on the display [2]. Enter the number 0 for calling the base or, when using more registered
handsets, enter the number of the handset you want to call. As soon as the connection to the base
or the other handset has been established, you can talk internally. Press the ESC/INT button on the
multifunction control [4] to toggle between the external and the internal call.
Press and hold the ESC/INT button on the multifunction control [4] for approx. 3 seconds to make
a conference call.
New message in voice mail
If there are new messages in the voice mail, the icon
appears on the display [2]. After you
have listened to the voice mail message, the
icon disappears.
To be able to use the voice mail, your provider must support it.
Locking the keypad
Press and hold the Hash button [7] for approx. 2 seconds to lock the keypad against accidental
input. However, you will still be able to answer any incoming calls by pressing the Dial button [11].
To unlock the keypad, press and hold the Hash button [7] again for approx. 2 seconds.
When the keypad is locked, the icon will show on the display [2].
It is still possible to dial emergency numbers while the keypad is locked.
Switching the ringtone off
Press and hold the Asterisk button [10] for approx. 2 seconds to switch the ringtone off. To switch
the ringtone back on, press and hold the Asterisk button [10] again for approx. 2 seconds.
When the ringtone is off, the
icon will show on the display [2].
166 - English
Publicité
