Publicité
4. Select the Internet connection mode you would like to configure, and click Next to continue.
5. Select the Internet connection type to configure, and click Next. PPPoE is selected because
it's a common type. Confirm your connection type with your ISP.
6. Select A uto-detect to have it automatically detect your VPI/VCI settings, or select
Manual selection to manually enter your settings. Click Next to continue. Please wait while the
modem scans for the proper VPI and VCI settings. If the modem is having trouble detecting the
proper VPI and VCI settings, please click Manual Selection and contact your Internet Service
Provider (ISP) for the proper VPI and VCI settings.
PPPoE (RFC-2516 PPP over Ethernet)
7
Publicité
