Multipoint Connections; Activating The Multipoint Feature - Coby BDV-EF200 Mode D'emploi

Getting Started
After deactivating the connection, the speaker-
phone will wait 10 minutes and then power off.
The blue LED will flash twice at 3-second intervals
to indicate that there is no active connection be-
tween the speakerphone and another device.

Multipoint connections

The Multipoint feature allows you to connect up to 2
mobile phones to the speakerphone at the same time.

Activating the Multipoint Feature

The default setting of speakerphone's multipoint function
is off. To use the multipoint function, you must activate it
manually.
In standby mode, press and hold VOL+ for 3 seconds

until you hear a beep. The multipoint function is now
active.
To deactivate the multipoint function, press and

hold VOL- for 3 seconds until you hear a beep. The
speakerphone will turn off the multipoint function
and power off automatically. When you turn on the
speakerphone again, it will connect automatically to
the most recently paired Bluetooth device.
When the multipoint function is enabled, the speak-
erphone will automatically connect to the last 2
cellular phones with which it has been paired.
www.cobyusa.com www.cobyusa.com Page 9 Page 9