Deactivating A Connection - Coby BDV-EF200 Mode D'emploi

Getting Started
7. Exit your phone's Bluetooth menu and place your
mobile phone and speakerphone no more than 10
meters apart. You should now be able to make and
receive calls using your speakerphone.
If the pairing cannot be completed within 2 min-
utes after the pairing mode is activated, the
speakerphone will power off automatically. If this
occurs, please repeat the pairing steps above.
After pairing is completed, your speakerphone will enter
standby mode. The pairing connection must be active for
you to make or receive calls, as indicated by the headset
icon on your cellular phone display. If the headset icon
does not appear, please follow the steps below to activate
the connection.
on your phone:

list on your phone screen.
on the speakerphone:

"Accept" on phone screen to accept connection.

Deactivating a connection

When you need to connect your speakerphone with
another Bluetooth-enabled phone, please follow the steps
below to first disconnect the previous pairing.
1. Power off the speakerphone.
2. Select "Disconnecting" on the Bluetooth device
list of your mobile phone to disable/remove the
connection.
Page 8
Select "BT-PIHF13M" from the paired
Press MFB and select
Coby Electronics Corporation