BRIGHT 018704 Mode D'emploi page 18

EN
• Do not use an extension cord
unless absolutely necessary.
• The cross-sectional area of
the wires in the extension
cord must be dimensioned
for the power supply to the
grill.
• Do not allow the extension
cord to hang over the edge
of a table or worktop, or
where there is a risk of
tripping over it.
SYMBOLS
Read the instructions.
Approved in accordance with
the relevant directives.
Recycle discarded product
in accordance with local
regulations.
Warning: hot surface.
TECHNICAL DATA
Voltage
Output
Size
Weight
DESCRIPTION
18
230 V ~ 50 Hz
1280 W
31x29x14 cm
2.5 kg
DESCRIPTION
FIG. 1
1. Power light
2. Status light
3. Handle (does not get hot)
4. Grill pan
5. Oil pan
USE
1. Remove all the packaging and any
stickers.
2. Wipe the hotplates with a damp cloth and
then wipe dry.
3. Place the product where there is enough
free space on all sides to ensure the
adequate circulation of air.
4. Plug in the plug. The red and green status
lights come on to show that the product is
heating up.
5. The green status light goes off when
the product has the right cooking
temperature.
6. Apply a little cooking fat or oil on the
hotplates before using for the first time.
IMPORTANT:
Hot steam flows out when opening the lid
on the product – risk of scalding. Keep your
hands and face away from hot steam.
7. The green status light goes on and off
when the heat is switched on and off to
maintain an ideal cooking temperature.
8. Pull out the plug and allow the product to
cool before cleaning.
OPEN / CLOSE
1. Lift up the top hotplate.
2. Lift up the hotplate to open the product.
The figures show the position of the
hinge.
FIG. 2