Lanaform Comfort Mode D'emploi page 4

EN
5. Indication of temperature intensity level
6. Indication of length of use
Introductory remarks on the use of the heating overblanket
The LANAFORM heating overblanket is intended for warming the human body. It should be used
either:
- Wrapped around you
• In this case, make sure the cord is positioned so that you cannot trip.
• Make sure that the heating overblanket is connected near a power outlet.
• Make sure that the remote control is easily accessible and not placed under a pillow or
another object.
• Do not wrap the heating overblanket around you so that you can no longer move freely.
Always leave a space between yourself and the blanket so that you can have easy access to
the remote control or the power plug.
- Or like a blanket on a bed (and not under the person as a mattress cover)
• In this case make sure that the remote control is easily accessible and not placed under a
pillow or another object.
Safety
This heating plaid is equipped with a safety system. An electronic sensor prevents overheating
of the heating plaid over its entire surface by automatic shutdown in case of failure or when the
connector is not properly connected to the power cable.
- If the temperature indicator (5) is displaying the letter "P", turn the cover to the "Off" position.
Check that the plug is securely plugged in and turn the plaid on again. If the light is still displayed,
this means that the plaid's internal connection is encountering a problem. In this case, take the
plaid back to the supplier or its after-sales department.
- If the temperature indicator displays the letter "E", this means that the heating plaid is
encountering a problem again in the internal electronic circuit. In this case, take the plaid back to
the supplier or its after-sales department
Use of the plaid
To turn on the unit, first connect the switch to the heating plaid by plugging the connector and
then insert the plug into a 220-volt power source.
Make sure the remote control is in the «ON» position (1). Two indicator lights "0" will appear on the
LED screen showing the heating intensity and the timer mode (5) and (6) .
To heat the plaid as quickly as possible, we recommend that you first set the thermostat to High (4)
with the button specifically provided for this purpose (4) and then decrease it as you wish.
4