Publicité
Assembly
1
Step 1 (Ceiling bracket installation and fan into the installed Bracket.)
Turn off the fan power supply at the circuit
breaker box and the wall switch. If it is a
Off
①
cement roof, please drill the installation
hole at the installation location.
Important!
¡Importante!
×4
Important !
Take out
Hang the motor on the hook of the
3
③
Bracket
Step 2 (Receiver installation and wiring)
AC IN L(Brown)
Connect the wires according to the polarity (the color of the
①
AC IN N(Blue)
Hang the motor on the hook of the Bracket.
House power cord may be different if the color is the same).
Cuelga el ventilador del gancho.
Ground(Yellow/green)
House power
Accrochez le moteur au crochet du support.
To Motor
Remove the Motor, align the motor with
5
②
U(Pink)
the mounting holes of the Bracket
V(Gray)
W(Red)
(Already connected)
Secure with the removed screws
③
Align the motor with the mounting holes of the Bracket.
Alinea los agujeros del motor con los del soporte.
Alignez le moteur avec les trous de montage du support.
Solid wood roof
Assembly Instructions
Not included
Screw
OFF
×4
Take out
AC IN L(Brown)
AC IN N(Blue)
Ground(Yellow/green)
To Motor
U(Pink)
V(Gray)
W(Red)
(Already connected)
.2.
.2.
×4
Screw
Step 1 (Ceiling bracket installation and fan into the installed Bracke
Montaje
Turn off the fan power supply at the circuit
breaker box and the wall switch. If it is a
①
cement roof, please drill the installation
hole at the installation location.
2
Can be installed on <15º sloped roof.
Choose the following installation methods
②
according to the actual situation of the roof.
Hang the motor on the hook of the
③
Bracket
or
Tighten the 2 screws.
Apriete los 2 tornillos.
Serrez les 2 vis.
Step 2 (Receiver installation and wiring)
4
Connect the wires according to the polarity (the color of the
①
House power cord may be different if the color is the same).
House power
Remove the Motor, align the motor with
②
the mounting holes of the Bracket
Remove the Motor, align the motor with
②
Make the connections. If in doubt, consult a technician
the mounting holes of the Bracket
Haz las conexiones. Si tienes dudas consulta a un técnico.
Faites les connexions. En cas de doute, consultez un technicien.
Secure with the removed screws
6
③
Secure with the removed screws
③
Remove the screws.
Saca los tornillos.
Retirez les vis.
Assembly Instructions
Not included
Screw
Montage
②
OFF
or
Cement roof
Solid wood roof
×4
Take out
Not included
Screw
AC IN L(Brown)
AC IN N(Blue)
Ground(Yellow/green)
To Motor
U(Pink)
V(Gray)
W(Red)
(Already connected)
.2.
×4
Screw
Screw
Can be installed on <15º slo
Choose the following installa
according to the actual situa
Remove the Motor
②
the mounting holes
Secure with the rem
③
×4
Publicité
