Impecca HSB120 Mode D'emploi page 7

Getting Started and Bluetooth® Pairing
1) Charge your unit by plugging the
(included) mini-USB end of the
connection cable into the back of the unit
and USB-A end of the cable into a
computer or powered USB wall adapter
(not included).
2) While charging, you will see a red LED
shining through the small hole beneath
the
When finished, the LED should go out.
3) To power on unit, slide rocker switch on
the rim of the right-side ear cup from
"OFF" to "ON."
4) Your HSB120 supports two different
modes. Bluetooth mode and microSD
mode. When entering Bluetooth mode,
you will hear a three-tone sound. When
entering microSD mode, you will hear a
steady tone. To switch between Bluetooth
logo on the right-side ear cup.
7