Publicité
Les langues disponibles
Les langues disponibles
A
B
1. Remove all parts from the packaging and check whether all parts are present as shown in the overview
above.
2. Place the pedals (A) over the arch (B). Slide the washers (F) over the bolts (G) and place the bolts
in the appropriate holes in part (B). Tighten the nuts (H) with the supplied open-end wrench (D). It is
recommended to insert the Allen key (E) into the bolts to provide enough force while tightening the
nuts.
3. Slide the first part of the exercise bike (A + B) over the upright tube of one of the T-shaped stands (C),
making sure that the upright tube holes are level with the holes on the exercise bike.
4. Slide the washers (I) over the bolts (J) and place the bolts in the appropriate holes in the base. Tighten
the bolts using the supplied Allen key (E).
5. Repeat steps 3 and 4 for the other side of the mobility trainer.
6. Turn the adjusting screw (K) into the top of the bottom bracket.
Note: Do not force the adjusting screw!
With this adjustment screw you set the FW8:
Turning clockwise = heavy pedalling
Turning anti-clockwise = light pedalling
Adjustable foot straps
Specifications
Model no.:
Weight:
Dimensions (HxWxD):
Class:
Body mass:
C
2x
Fysic FW8
2.1kg
26 x 40 x 53 cm
H (Indoor use)
Max. 100kg
Manufacturer / Service:
Aziëlaan 12, 5232 BA
's-Hertogenbosch
The Netherlands
www.fysic.com
D
G
F
2x
2x
Hesdo BV.
4x
I
E
4x
H
K
2x
J
v1.0
Publicité
