Rechner Sensors 10 Serie Notice D'utilisation page 13

Pin connection for pluggable sensors
Pin connection for pluggable sensors (top view)
4 3
1 2
Electrical connection
Disconnect the system from power. Then connect the device according to the connection diagram.
Operating voltage (U ) = 15...30 V DC
B
The indicated load (R ) needs to be considered and should not be more or less.
L
For further technical data, please refer to the technical data sheet of the sensor you are using. A
large number of data sheets can be found on our website: www.rechner-sensor.com.
4 3
5
1 2
The protective earth connection
i
(Pin 5) is only present on sensors with
metal housing and earth connection.
13