Publicité
Les langues disponibles
Les langues disponibles
1. Warranty
•
Read the user manual of the Lovens
Explorer for the general terms and
EN
conditions and safety instructions for
use of the Lovens Explorer.
•
Lovens offers a two-year warranty
against manufacturing and/or
production defects.
•
The warranty requires the use of only
original parts. If other parts are used,
Lovens cannot be held liable for any
damage.
•
Ensure that the front bench is properly
fastened as described in the user
manual. Incorrect attachment may
cause damage to the front bench or
Lovens Explorer and/or can lead to
hazardous situations.
•
Modifying the front bench yourself
is not permitted. If this is done,
functionality can change and the
warranty will be voided.
•
This front bench is only suitable for the
Lovens Explorer from Lovens.
•
The warranty is valid from the moment
at which the dealer sells the front
bench to the consumer. This means
it is important to keep your proof of
purchase in a safe place.
2.
Requirements
2.1 Own parts
•
Certain tools are required to install the
front bench. Ensure that you have the
following tools:
•
Hex wrench 4
•
Flat screwdriver
6
.
2.2 Product parts
❶
❷
❸
❹
❺
3. Instructions
.
3.1 Installation instructions
1.
2.
3.
Figure 1 - Lovens Explorer front bench parts.
Seat
M6x16 bolt (4x)
M6x25 bolt (6x)
M6 washer (10x)
Feet with seatbelt
❶
Place the seat
on the table with the
top side facing downwards. The frame
on the underside of the seat will now
be open.
❺
Take the feet
and open the buckle.
This allows the two parts to be
attached separately.
❺
Place the foot
onto the frame on the
underside of the seat. There is a left
❶
❷
❸
❹
❺
.
Publicité
