Télécharger Imprimer la page

CEBEK PM-15 Mode D'emploi page 4

Publicité

PM-15
OUTPUT CONSIDERATIONS : During the operation of the circuit, and depending on its load, a fluctuation or
incorrect operation of the output may occur. If this occurs, install an anti-spark circuit between the two relay contacts
used in the connection.
CONSIDÉRATIONS DE SORTIE : Pendant le fonctionnement du circuit, et en fonction de sa charge, une fluctuation
ou un fonctionnement incorrect de la sortie peut se produire. Si cela se produit, installez un circuit anti-étincelles
entre les deux contacts de relais utilisés dans la connexion.
CONSIDERACIONES SOBRE LA SALIDA : Durante el funcionamiento del circuito, y según sea su carga, podrá
producirse una fluctuación o un incorrecto funcionamiento de la salida. Si esto ocurre, instale un circuito anti-
chispas entre los dos contactos del relé utilizados en la conexión.
CONSIDERACIONS SOBRE LA SORTIDA: Durant el funcionament del circuit, i segons sigui la seva càrrega,
podrà produir-se una fluctuació o un incorrecte funcionament de la sortida. Si això passés, instal·li un circuit anti-
espurnes entre els dos contactes del relé utilitzats en la connexió.
www.cebek.com
-
sat@fadisel.com

Publicité

loading