Mac Mah MULTI-FX BAR Mode D'emploi page 20

 DMX channels：3 ou 26 canaux
 Power consumption : 72W
 Weight：6.2 kg
This BoomToneDJ fixture is complying with European standards : EN 2014/30/EU,
EN 2011/65/EU, EN 2014/35/EU.
5- Menu
Mode
DMX
Auto
Sound
Speed
Sensitivity
Dimming
Silent scene
Slave
Infrared
A. By Master/Slave built-in program function.
By linking the units in master/slave connection, the first unit will control the other units
to give an automatic, sound activated, synchronized light show. This function is good
when you want an instant show. You have to set the first unit in Automatic, sound
activated mode. Its DMX input jack will have nothing plugged into it. The other units will
have to select SLAV , Their DMX cables plugged into the DMX input jacks (daisy chain)
and the slave led lights will constantly on.
B. By universal DMX controller
Using universal DMX controller to control the units, you have to set DMX address from 1
to 512 channel so that the units can receive DMX signal.
Press the MENU, then find Addr, press ENTER, when the 1 is showing on the display.
Pressing ENTER. Use DOWN and UP button change the DMX512 address.
Programming
26 CH
Addr
3CH
Auto Au1-8
Soun So1-8
SPEE SP1-9
SEnS Se1-9
dIMM dI1-9
SILE on/oFF
SLAV Slave
InFr on/oFF
Description
d001-d512
Auto program
Sound program
Speed
MIC sensitivity
Master dimming
Silent scene by Sound program
Slave
Enable or Disenable IR remote
20