Trust TB-7300 Mode D'emploi page 21

Product information
A: Wheel + button
B: Programmable hotkeys
C: Tablet mode buttons / indicators :
P ower : On = Active; Blinking = Stand-by (pen in sleep mode or out of range)
U U
S croll : On = Wheel → turn to scroll; Wheel button → click for horizontal/vertical scroll change.
U U
Z oom : On = Wheel → turn to zoom in/out; Wheel button → click and hold for hand tool.
U U
V olume : On = Wheel → turn to increase/decrease sound; Wheel button → click for mute.
U U
W ide : On = Work area set to wide monitor format (D)
U U
4 :3 : On = Work area set to 4:3 monitor format (E)
U U
Installation
Place CD in CD-ROM. Install driver.
1
Windows Vista: Allow and execute all necessary actions.
Follow website instructions.
2
Windows Vista: Allow and execute all necessary actions.
2 Follow setup instructions. Restart computer.
3 Connect USB. Wait until Windows completes installation automatically.
4 (A) Pull off pen cap. Take off battery cover. (B) Insert battery. Close battery cover and cap.
Hotkey configuration
5 Right click tablet icon and select "Hotkey".
6 Open pull-down menu to change hotkey profile.
7 To create custom profile: Click "New".
8 Insert profile name. Click browse button.
9 Select corresponding executable file from list. Click "OK" twice.
Click hotkey button. Select new hotkey from list.
10
Default hotkeys from pre-set profiles cannot be changed.
11 Enable "Setting". Insert hotkey name.
Define hotkey: (A) key combination, or (B) link (on local machine, network or internet).
12
Repeat 11 - 13 to add / define more hotkeys.
13 Click "Confirm" and "OK".
Pen configuration
14 Right click tablet icon and select "Pen Pad".
Configure (1) Measurement unit: "inch" or "cm". (2) Tracking mode: "absolute" (pen location on tablet
corresponds to pointer location on screen) or "relative" (pen works like mouse).
15
Windows Vista: "Tablet mode" default setting is "Graphic mode".
Click "Buttons":
16 Configure: (1) Side buttons. (2) Pen Offset Value (only necessary if tablet encounters difficulties finding
the pen). (3) Pen pressure. Click "OK".
D: Setting wide monitor
E: Setting 4:3 monitor
F: Transparent overlay
1