4 Identification
4.1 Product description and type
designation
Junction weatherproof box for the power connexion,
external to the ULISSE unit (according to the UL
norm).
4.2 Product markings
See the label attached to the product.
5 Preparing the product for
use
Any change that is not expressly approved
by the manufacturer will invalidate the
guarantee.
5.1 Unpacking and contents
5.1.1 Unpacking
When the product is delivered, make sure that the
package is intact and that there are no signs that it
has been dropped or scratched.
If there are obvious signs of damage, contact the
supplier immediately.
Keep the packaging in case you need to send the
product for repairs.
2
5.1.2 Contents
Check the contents to make sure they correspond
with the list of materials as below:
• Waterproof box complete with conduit and cables
• 45 degree fitting for conduit with gaskets
• 90 degree fitting for conduit with gaskets
• Straight fitting for conduit with gaskets
• Adapter with gasket
• Screws for fixing box
• Instructions manual
5.2 Safely disposing of packaging
material
The packaging material can all be recycled. The
installer technician will be responsible for separating
the material for disposal, and in any case for
compliance with the legislation in force where the
device is to be used.
When returning a faulty product we recommend
using the original packaging for shipping.
5.3 Preparatory work before
installation
5.3.1 Drilling the box
Drill the box for cable outlets, as required.
MNVKUPTJBUL_1420_EN