Hoelzle WLK/E Mode D'emploi page 7

Warnings
Potential electrical shock. Do not use soldering iron
§
if housing is cracked or damaged. Never use in wet
area.
Do not attempt to repair or modify soldering iron.
§
Always de-energize device being soldered.
§
Potential burn hazard. Hot tip can cause severe
§
burns. Do not touch tip of tool.
Allow tool to cool before touching tip or replacing
§
protective cap.
Work only in a dry area.
§
Work in area free from flammable materials.
§
Always store the soldering iron in a dry place out of
§
reach of children or anyone who has not read these
instructions.
Always wear eye protection and gloves when opera-
§
ting the soldering iron.
Never touch the tip of a hot soldering iron or
§
attempt to remove solder from the tip with your
hands.
Do not use in the fabrication or repair of potable
§
water service systems.
Always rest the soldering iron where heat from
§
soldering iron cannot damage nearby items.
Ensure that switch is in the OFF position when the
§
iron is not in use.Tip remains hot after use for several
minutes. Ensure tip is cool before storing the solde-
ring iron. Never leave soldering iron unattended.
Do not disassemble or modify the battery. The
§
battery contains safety and protection devices which
if damaged, may cause the battery to generate heat,
rupture or ignite.