LEXIBOOK MeteoClock SM880 Manuel D'instructions page 9

SM880GB.qxd 16/02/2005
Back Light :
Press "SNOOZE/LIGHT" button, back light states for 5 seconds
Note
Always read the users manual carefully before operating the Unit.
Avoid placing the clock near interference sources/metal frames such as computer or TV sets.
The clock loses its time information when the battery is removed.
All Setting Mode will automatically exit in 5 seconds without any adjustment.
Weather Station Receiver SM880
Battery Type: 2 X 1.5V AA batteries
Operation Temp: 0°C- +50°C
Temp. Range: 0°C- +50°C
Measurement Accuracy: +- 1°C
within measuring range of 0 to 40°C
Resolution: 0.1°C
Problem:
Temperature reading of
outdoor remote sensor
seems to high.
Receiver is no longer
receiving remote sensor
signals or display.
This product is covered by our two-year warranty.
For warranty requirements or after sales service, please contact your local retailer with your
proof of purchase. Our warranty covers all manufacturer defaults but does not cover
deterioration due to non-respect of the Instruction Manual or bad handling of the product
(like sun or water exposure or dismantling of the product).
Warranty does not cover batteries.
Freephone helpline: 0 808 100 3015
http://www.lexibook.com
Environmental Protection
Unwanted electrical appliances can be recycled and should not be discarded along
with regular household waste! Please actively support the conservation of resources
and help protect the environment by returning this appliance to a collection centre
(if available).
Copyright © Lexibook 2005
10:44 Page 9
SPECIFICATIONS
Weather Station Transmitter
Battery Type: 2 X 1.5V AA batteries
Temp. Range: -20C- +50C
Transmission Frequency: 433Mhz
Transmission Range: 30 meter (Open area)
TROUBLESHOOTING
Ensure the remote sensor is out of direct sunlight, and
away from sources of heat.
Repeat the learning procedures.
- Temperature may be below -30°C.
- Batteries in remote sensor may need changing.
- Move remote sensor closer to the receiver.
- Make sure remote sensor is away from sources of
electrical disturbance.
WARRANTY
Solution:
9