Publicité
Les langues disponibles
Les langues disponibles
LS500BT 512
(5) MODE OF OPERATION
Audio playback via Bluetooth
The Schwaiger LS500BT meets the Bluetooth
ports the following profiles:
Advanced Audio Distribution profile (A2DP)
Audio/Video Remote Control profile (AVRCP)
Hands Free profile (HFP)
Note
Upon switching on, the loudspeaker automatically tries to set up a con-
nection with the last two Bluetooth
loudspeaker with another unit, the connection profile of the lesser used
Bluetooth
unit is overwritten.
®
Procedure
• Make sure that your Bluetooth
function activated.
• Make sure that your Bluetooth
Devices.
• Make sure that the loudspeaker is located within the Bluetooth range of max.
10 m.
(1) Press the POWER button to turn on the loudspeaker. The device emits a
sound to indicate that it is ready for operation. The loudspeaker automati-
cally searches for a connection. The blue LED indicator flashes. (at the left
side of the POWER button)
(2) Open the Bluetooth
settings on your mobile device and wait until
®
LS500BT appears in the list of Bluetooth
and wait until you hear the speaker emit a sound and the speaker is listed
as connected in the Bluetooth
stop audio playback on your mobile device or using PLAY/PAUSE on the
loudspeaker.
Note
With some mobile devices, it can happen that an additional password has
to be input. In that case, please input "0000".
Hands-free function
You can use the loudspeaker as hands-free set for your mobile phone. For this
function, the mobile phone must be connected to the loudspeaker via Blue-
tooth
.
®
If you received a phone call the ringtone of your mobile device will be played
via the loudspeaker. Press the phone button to accept the call. Press the phone
button again to end call.
Note
To increase the call quality, make sure that you are near the loudspeaker
with your mobile phone during the call.
(6) CARE AND MAINTENANCE
Only clean this product with a slightly damp, lint-free cloth and do not use
aggressive cleaning agents.
(7) GENERAL FUNCTIONS
Functions
Meaning
Switching on
Press the POWER button to turn on the loudspeaker.
Switching off
Press the POWER button to turn off the loudspeaker.
MUSIC: Start/
Press the
Pause
it again revokes the pause function. The music continues.
Short Press the „+" button to increase the volume.
Volume +
Short Press the „-" button to reduce the volume.
Volume -
Next song „>"
Press and hold the „+" button to switch to the next song
Previous song „<"
Press and hold the „-" button to switch to the previous song
Answer call
Press the
End call
Press the
®
2.1 + EDR standard and sup-
®
units used. If you wish to pair the
®
capable device is on and the Bluetooth
®
capable device is visible for other Bluetooth
®
devices found. Select LS500BT
®
settings on your mobile device. Start and
®
button briefly once to interrupt the music. Pressing
button briefly once to accept an incoming call.
button again briefly once to end the call.
(8) TECHNICAL DETAILS
Bluetooth
Paring Name
®
Bluetooth
Standard
®
Supported Bluetooth
Profiles
®
Bluetooth
Range
®
Output Power
Frequency
Playtime
Battery type
Power Input (via Micro USB)
Charging Time
Weight
®
Protection class
®
(9) ERROR CORRECTION
Problem
Possible cause
The loudspeaker
The battery might be discharged
cannot be
and needs to be recharged.
switched on
No sound
The loudspeaker is not
connected to your device.
The volume has been set too
low.
The loudspeaker is switched off.
The loudspeaker
The pairing has failed
cannot be
connected
The playback unit has been swit-
ched off or is in sleep mode.
The loudspeaker
The Bluetooth
cannot be found
(usually when there are about
during the
10 connected devices)
search.
The loudspeaker
The functions of the loudspeaker
does not react to
are faulty.
any button that
is pressed
EC declaration of conformity
Schwaiger GmbH hereby declares that this product conforms to the basic re-
quirements and other relevant regulations of the Directive 1999/5/EC. The
declaration of conformity is at www.schwaiger.de/downloads. This product was
designed, tested and manufactured in accordance with the European R&TTE
Directive 1999/5/EC.
Important safety instructions:
If used correctly, rechargeable Lithium-Ion and Lithium-Polymer batteries are
a safe and reliable power source for portable devices. However, faulty or in-
correct use can result in leaks, burns, fire or explosion/disassembly and cause
harm to persons or damage to the device.
• Do not dismantle this product into its individual parts. The unit does not
contain any parts that have to be maintained by the user. Incorrect assembly
could result in electric shocks or the danger of fire.
• Do not let the product fall and do not subject it to intense vibration.
• Protect the product from moisture, water, rain, snow or drizzle.
• Do not insert any objects in the sockets or openings of the product.
3
LS500BT
2.1 + EDR
A2DP/ AVRCP/ HFP
10 m
1x 5W
100 Hz – 16.000 Hz
4 - 5 hours
Lithium-Ion
DC 5V – 500 mAh
2-3 hours
245 g
IPX5
Possible rectification
Charge the device.
Check the connection and if
required, set it up afresh.
Increase the volume.
Switch on the loudspeaker
again.
Check if all the required
settings on the playback unit
were selected correctly.
Switch on the playback unit
again, or charge it if required.
display list is full
Delete old connected devices
®
from the Bluetooth
playback unit.
Delete the „pairing" settings
and connect the loudspeaker
once again.
list of the
®
Publicité
