Start-Up And Operation; Connecting The Controller - uRAGE GAMEPAD VENDETTA 210 Mode D'emploi

4. Start-up and operation

4.1 Connecting the controller

• Connect the USB plug on the controller to your PC and press the Home button on
the controller
Note - Automatic disconnection
Be aware that you will need to carry out this procedure each time you log into the
PC.
4.2 Additional keys
• The following action keys can be assigned to the additional keys:
1/2/3/4/L/R/L2/R2/L3/R3/ D-PAD
• Individual functions or key combinations can be programmed.
• Your settings remain active after an interruption to the connection.
• Programming mode is aborted after 30 seconds
• Programming mode is ended after 25 keys
4.3 Programming the additional keys
• Hold the relevant M key and "Start" pressed until all four LEDs start to flash
• Now enter the individual key or key combination
• To finish, press the relevant M key again
• To delete the M keys, hold "Start" and an M key pressed.
• Now press the M key for which you wish to delete the setting.
4