first years Learning Curve miPump Double Y4613 Mode D'emploi page 7

If Using Pump Handle
Clean all parts prior to initial usage and after each use. Clean all parts prior to initial usage and after each use.
IMPORTANT: Do not sterilize any part of the breast pump in the microwave unless using
a product
1) Always separate the 3-wayadapter from breast shield before cleaning.
2) For miPump – Double Deluxe, always separate the optional bottle adapters from bottles.
3) After cleaning the valve, gently lift the end of the soft rubber piece (the end with the raised
If the end is stuck to the valve, wash valve again in warm soapy water. DO NOT PRESS OR PULL
HARD ON THE FLEXIBLE FLAPPER END. DAMAGE CAN OCCUR IF THE FLAPPER TEARS.
4) Make sure Y Connector plug is in place, closing the opening.
5) W ipe hose clean with clean, damp cloth.
Cleaning Flexi-Fit™
Guide Shields
Surface
Wipe Only
�
Warm Water/
mild liquid soap
�
Top Rack
Dishwasher-safe
(2-5 min)
�
**Boil-Safe
**Sterilizer
�
(use as instructed)
**Harmless color change possible. Allow all parts to cool before reassembling.
TO STORE: Make sure the pump and all components are completely dry before placing in tote
bag. If you have installed batteries, remove them prior to storing the pump for a prolonged time
period.
REMOVE BOTTLE ASSEMBLY
BREAST PUMP CARE
3-way Valves Bottle
Adapter Parts
�
�
� �
�
�
�
1) Remove bottle assembly by pushing the
release buttons
2) Remove hose connectors from 3-way adapter
3) Remove shields, adapters, and valves
for cleaning.
Tote Pump
Bag Cradle
� �
�
�
�
�
6
IMPORTANT: Place Flexi-Fit™
shields in this drying position
to prevent warping.
Pump Pump
Handle
� �
Hose
�