Samsung VS20R90 Serie Manuel D'utilisation page 28

Operation
NOTE
• If excessive force is applied to a brush or foreign matter is caught in the
spinning brush (drum), the brush may stop working to protect the motor or
vacuum. Turn the vacuum off, remove the foreign matter, and then turn the
vacuum on. If the vacuum does not start, turn it off and then on again.
• Static electricity may occur depending on the humidity, temperature,
or floor material, etc. in your home. If it happens repeatedly, contact a
Samsung service center.
• Please charge the battery fully:
– Before using a newly purchased battery for the first time or if you
haven't used the battery for a long time.
– When the battery level indicator is on the lowest indication and blinks.
• If you are not going to use the vacuum for a long period of time or you're
going to be away from home for a long period of time, unplug the charging
stand, and then detach the charging stand from the battery. When the
battery is not being charged and not being used, it will slowly discharge.
• When the battery level is low, recharge it. If the level of the battery
remains low for a long period of time, it can cause the performance of the
battery to degrade.
CAUTION
• When the spinning brush (drum) inside a brush is working, do not touch
the brush.
– Otherwise, your hand can be caught and it may cause an injury.
28 English