Publicité
ENGLISH
Pairing
1. Make sure that your mobile device is within at least 1 meter
of the speaker when trying to pair and that the tower
speaker is power on and in Bluetooth mode.
2. If the tower speaker have not connect to any mobile
device, it will enter pairing mode automatically. The BT
icon of (2) LED display will flashes rapidly when the tower
speaker enter pairing mode.
3. Access the Bluetooth settings in your mobile device and
select Search/Scan for devices. Your mobile device will
begin to search for a Bluetooth signal.
4. You will see the name "NGS STARLIGHT" appear in the
device list. Select it to pair, and if a password or PIN is
needed enter the numbers "0000".
5. After a successful connection has been made the BT icon
of (2) LED display will light up.
PLAYING MUSIC
1. Make sure that your Bluetooth A2DP (audio/music) mobile
device is paired with the tower speaker.
2. Begin playing music on your mobile device or simply
pressing the (9) play/pause button and you should hear
the music play through the tower speaker. If the music is
low, increase the volume on the tower speaker first, then
adjust your mobile device's volume.
3. You can control the playing directly from the tower
speaker.
Next track: briefly press the (11) next track button.
Previous track: Briefly press the (10) previous track button.
Increase volume: Turn the volume knob to the right.
Decrease volume: Turn the volume knob to the left.
Play and pause switch: Briefly press the (9) play/pause
button.
5
Publicité
