Publicité
Les langues disponibles
Les langues disponibles
Preparing for installation
Note: The estimated installation time is 120 minutes. This product can only be installed by a certified electrician.
Carefully separate the fan's parts, avoiding the use of cutters or blades that could scratch any part of it.
Remove all pieces. Place the motor on top of a rag or soft surface to avoid damaging its finish. Handle it carefully to prevent
its casing from becoming bent or scratched.
The fan must be placed on the ground or on a table that is sufficiently large such that no pieces may fall.
Verify that all parts are present before starting assembly. Check the packaging to find elements believed to be missing. Exa-
mine all elements. You must have the following:
EN
Description
Ceiling bracket
Top canopy
Shaf
Body/motor
Blades
Fan blade fastenings
Required tools
Phillips-head screwdriver and flat-head screwdriver for flat-head screws.
Safety ladder.
Electric drill.
Installing the fan
The fan must be installed at a location on the ceiling sch that the blades are at least 2.3 m above the floor and 300 mm from
any object or wall. The mounting bracket must be attached to a ceiling structure that is capable of supporting a minimum of
30 kg using the two screws provided. At least 30 mm of the length of the screws must be screwed into the bracket.
WARNING!
Quantity
Photo
1
1
1
1
6
6
SEE INSTALLATION STEPS AT THE END OF THIS MANUAL
Description
Quantity
Blade balancing kit
Diffuseur
Manual chain kit
Installation kit
Instructions manual
12
Photo
1
1
1
1
1
Publicité
