WARNING ‒ Risk of suffocation!
Children may put packaging material over their
heads or wrap themselves up in it and suffocate.
Keep packaging material away from children.
▶
Do not let children play with packaging material.
▶
WARNING ‒ Risk of injury!
Components inside the appliance may have sharp
edges.
Wear protective gloves.
▶
Included with the appliance
After unpacking all parts, check for any damage in
transit and completeness of the delivery.
Establishing the pipework
Establish the pipework in such a way that the flex-
1.
ible hose is flush with the cabinet base.
For circulating-air mode, establish an air outlet in
2.
the unit's front toe kick.
The air outlet must have a minimum cross section
of approximately 400 cm². Make the outlet open-
ing in the base panel as large as possible in order
to keep draughts and noise to a minimum.
4
Fitting the odour filters
Insert the odour filters into the odour filter cart-
1.
ridge.
Insert the odour filters in the correct direction.
Press .
2.
a The glass panel moves halfway down and the
grease filter cartridges are transported to the top.
Remove the grease filter cassettes.
3.
Insert the odour filter cartridge.
4.