Food Refill Or Refill Instructions; Using The Control Panel - PRIME AQUATIC PRIME POND FISH FEEDER Manuel D'utilisation

3. Connect this assembly to the main mast and firmly
tighten the fixing screw.
4. Install the controller on the small bracket.
5. Connect the motor cable to the controller and connect
the assembly to the power supply.

Food refill or refill instructions

•
To refill the tank with food, unscrew the cover. When the
dispenser has already been filled before, evacuate the
residual powders by inverting it, then pour in the food.
•
Unscrew the auger cover, take out the auger to clean or
replace it, then replace it.
•
Fill the tank with the desired food: granules or pellets.
When doing this, check that the device is turned off.
Do not reach into the feed cylinder.
When replacing the auger, make sure there is no food in the tank.

Using the control panel

Prime Aquatic – info@prime-aquatic.com
6