Publicité
Les langues disponibles
Les langues disponibles
2. CONFIGURE AND OPERATE THE REMOTE CONTROL IN 4 EASY STEPS
2.1 (Step 1) Correct setting of time and day
_________________________________________________________________________________________________________________________________________________
1. Press the button
/
to set the correct day where DAY 1 is Monday and DAY
7 is Sunday.
2. Press the button
/
to set the correct hour from 00 to 23.
_________________________________________________________________________________________________________________________________________________
2.2 (Step 2) Setting the automatic weekly program
After setting the time and day, the Remote Control will follow the preset automatic program. The heating program includes 6 daily time bands for the temperature level, numbered from 1 to
6. The time bands can be set between 00:00 and 24:00, adjusting them in 10-minute increments. Each temperature level can be set between 7°C and 32.5°C, adjusting it in 0.1°C incre-
ments. It is therefore possible to program any combination of time and temperature during the day, and each day of the week can be different. The preset automatic program is as follows:
From Monday to Friday
Start time
Temperature level
From Saturday to Sunday
Start time
Temperature level
Follow the instructions below to change the preset automatic program.
1. Press the button
. If DHW programming has been enabled, select the radiator symbol with the buttons
ton
. The 6 daily time bands blink and the number 1 of DAY 1 is enclosed in a square to indicate that the time band 1 of Monday can be changed.
2. Press the button
. The hour and minutes start blinking: press the buttons
ments. By keeping the button pressed the hour and minutes will change rapidly.
3. Press the button
. The indication of room temperature inside the house starts blinking: press the buttons
ture level in 0.1°C increments. By keeping the button pressed the temperature will change rapidly.
4. Press the button
. The 6 daily time bands blink.
5. Then press the button
6. The remaining time bands can be displayed by selecting bands 3, 4, 5 or 6 with the buttons
7. It is now possible to choose program setting for the next day:
. The day starts blinking: press the buttons
. The hour starts blinking: press the buttons
Band 1
Band 2
06:30
08:00
21°C
18°C
Band 1
Band 2
08:00
10:00
21°C
21°C
to display time band 2 of Monday, modifiable by repeating points 2 to 4.
code 3541Z220 - Rev. 00 - 05/2021
3. Press the button
/
4. Press the button
Band 3
Band 4
12:00
14:00
21°C
18°C
Band 3
Band 4
12:00
14:00
21°C
21°C
/
to change the time band start time in 10-minute incre-
. The minutes start blinking: press the buttons
to set the correct minutes from 00 to 59.
.
Band 5
Band 6
18:00
22:30
21°C
16°C
Band 5
Band 6
18:00
22:30
21°C
16°C
/
and confirm with the but-
/
to change the tempera-
/
, repeating point 5.
75
EN
Publicité
