Important Safety Instructions - Ninja AUTO-IQ BN750EU Guide D'instructions

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 34

IMPORTANT SAFETY INSTRUCTIONS

PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY
WARNING
To reduce the risk of injury, fire, electrical shock or property damage,
basic safety precautions must always be followed, including the following
numbered warnings and subsequent instructions� Do not use appliance for
other than intended use�
1
Read all instructions prior to using the
appliance and its accessories.
2 Carefully observe and follow all
warnings and instructions. This unit
contains electrical connections and
moving parts that potentially present
risk to the user.
3 Take your time and exercise care during
unpacking and appliance setup. This
appliance contains sharp, loose blades
that can cause injury if mishandled.
4 Take inventory of all contents to ensure
you have all parts needed to properly
and safely operate your appliance.
5 Blades are sharp. Handle carefully.
6 This product is provided with a Total
Crushing® Blades and a Chopping Blade
Assembly. ALWAYS exercise care when
handling blade assemblies. The blade
assemblies are sharp and are NOT locked
in place in their containers. The blade
assemblies are designed to be removable
to facilitate cleaning and replacement if
needed. ONLY grasp the blade assembly
by the top of the shaft. Failure to use care
when handling the blade assemblies will
result in a risk of laceration.
7 ALWAYS exercise care when handling
the Pro Extractor Blades Assembly. The
blades are sharp. ONLY grasp the Pro
Extractor Blades Assembly by the outer
perimeter of the blade assembly base.
Failure to use care when handling the
blade assembly will result in a risk of
laceration.
8 Turn the appliance OFF, then unplug the
appliance from the socket when not in
use, before assembling or disassembling
parts, and before cleaning. To unplug,
grasp the plug by the body and pull
from the socket. NEVER unplug by
grasping and pulling the flexible cord.
36
ninjakitchen.eu
9 Before use, wash all parts that may
contact food. Follow washing instructions
covered in this instruction manual.
10 Before each use, inspect blade
assemblies for damage. If a blade is
bent or damage is suspected, contact
SharkNinja to arrange for replacement.
11 DO NOT use this appliance outdoors. It
is designed for indoor household
use only.
12 DO NOT operate any appliance with
a damaged cord or plug, or after the
appliance malfunctions or is dropped or
damaged in any manner. This appliance
has no user-serviceable parts. If damaged,
contact SharkNinja for servicing.
13 This appliance has important markings
on the plug blade. The entire supply
cord is not suitable for replacement. If
damaged, please contact SharkNinja
for service.
14 Extension cords should NOT be used
with this appliance.
15 To protect against the risk of electric
shock, DO NOT submerge the appliance
or allow the power cord to contact any
form of liquid.
16 DO NOT allow the cord to hang over
the edges of tables or worktops. The
cord may become snagged and pull the
appliance off the work surface.
17 DO NOT allow the unit or the cord to
contact hot surfaces, including stoves and
other heating appliances.
18 ALWAYS use the appliance on a dry
and level surface.
19 DO NOT allow children to operate this
appliance or use as a toy. Close supervision
is necessary when any appliance is used
near children. Keep the appliance and it's
cord out of reach of children.
20 This appliance is NOT intended to be
used by people with reduced physical,
sensory, or mental capabilities, or lack of
experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance by a
person responsible for their safety.
21 ONLY use attachments and accessories
that are provided with the product or are
recommended by SharkNinja. The use of
attachments, including canning jars, not
recommended or sold by SharkNinja may
cause fire, electric shock, or injury.
22 NEVER place a blade assembly on the
motor base without it first being attached
to its corresponding container (Jug or
cup) with the lid also in place.
23 Keep hands, hair, and clothing out of the
container when loading and operating.
24 During operation and handling of
the appliance, avoid contact with moving
parts.
25 DO NOT fill containers past the
MAX FILL or MAX LIQUID lines.
26 DO NOT operate the appliance with
an empty container.
27 DO NOT microwave any containers or
accessories provided with the appliance.
28 NEVER leave the appliance unattended
while in use.
29 DO NOT blend hot liquids. Doing so may
result in pressure buildup and steam
exposure that can pose a risk
of the user being burned.
SAVE THESE INSTRUCTIONS
30 DO NOT process dry ingredients with the
Single-Serve Blending Cup and
Pro Extractor Blades Assembly, the Jug
and Total Crushing® Blades,
or the processor bowl and Chopping Blade
Assembly.
31 To reduce the risk of injury, never place
Chopping Blade Assembly or discs on
base without first putting bowl properly
in place.
32 DO NOT perform grinding operations with
the Single-Serve Blending Cup
and Pro Extractor Blades Assembly,
the Jug and Total Crushing® Blades.
33 NEVER operate the appliance without lids
and caps in place. DO NOT attempt to
defeat the interlock mechanism. Ensure
the container and lid are properly installed
before operation.
34 Before operation, ensure all utensils are
removed from containers. Failure to
remove utensils can cause containers to
shatter and potentially result in personal
injury and property damage.
35 Keep hands and utensils out of
containers while chopping to reduce the
risk of severe personal injury or damage
to the blender/food chopper. A scraper
may be used ONLY when the blender
or processor is not running. When using
the processor, always use food pusher to
add food. NEVER add food by hand.
36 If you find unmixed ingredients sticking to
the sides of the cup, stop the appliance,
remove the blade assembly, and use a
scraper to dislodge ingredients.
37 DO NOT open the Jug's pour spout cap
while blender is operating.
37
ninjakitchen.eu

Publicité

Table des Matières
loading

Table des Matières