Télécharger Imprimer la page

BOND MANUFACTURING HYFP30205-96 Manuel page 7

Masquer les pouces Voir aussi pour HYFP30205-96:

Publicité

Les langues disponibles

Les langues disponibles

LP (LIQUID PROPANE) GAS SUPPLY
• Always confirm that the burner control knob is in the "OFF" position before connecting
the gas supply.
• Do not obstruct the flow of combustion air and ventilation air to the appliance.
To Connect:
• Ensure that there is no debris caught in the head of the gas cylinder
and head of the regulator valve.
• Insert the nipple of the valve coupling into the cylinder valve and
tighten the black coupling nut by turning it clockwise with one hand
while holding the regulator with the other hand. (See diagram)
Hand tighten only.
To Disconnect:
• Always confirm that the cylinder valve is in the
"OFF" position before disconnecting the gas
supply.
• Hold the regulator with the one hand and loosen
the black coupling nut by turning it counter-
clockwise with the other hand.
IMPORTANT
• Disconnect the propane cylinder from the regulator valve when the appliance is not in
use.
SELECTING A
Always place this outdoor appliance on a hard, level, non-
combustible surface such as concrete, rock or stone.
Minimum Clearance from Unit to Combustible Materials
72"(182.8cm) from the top; 48" (121.9 cm) from all sides
and back. Do not locate this appliance under any
overhead enclosure. Position the appliance so that you
have easy access to the control knob.
Fire pit and propane gas cylinder
minimum distance must be over 60"
(as per right side photo)
LOCATION_________________________
CONNECTION__
7

Publicité

loading

Ce manuel est également adapté pour:

67456