Auto-Changeover (Heat/Cool) - TOTALINE Smart 1H Manuel D'utilisation

Auto Changeover (heat/cool)
Press until screen
displays "Auto"
Note: The Auto system setting
may not appear, depending on
how your thermostat was installed.
570-212
Auto Changeover is a feature used in
climates where both air conditioning and
heating are used on the same day. When
M27884 the system is set to Auto, the thermostat
automatically selects heating or cooling
depending on the indoor temperature.
Heat and cool settings must be at least
3 degrees apart. The thermostat will
automatically adjust settings to maintain this
3-degree separation (called "deadband").
The 3-degree separation between heating
and cooling set temperatures is fixed, and
cannot be changed.
11
P330 Series
69-2265EFS—01