Shelly Motion 2 Guide D'utilisation page 4

ENGLISH
router and the Internet. Shelly® devices
have embedded Web Interface accessible
at http://192.168.33.1 when connected di-
rectly to the device's access point, or at the
device's IP address on the local Wi-Fi net-
work. The embedded Web Interface can be
used to monitor and control the device, as
well as adjust its settings.
Shelly® devices can communicate direct-
ly with other Wi-Fi devices through HTTP
protocol. An API is provided by Allterco
Robotics EOOD. For more information,
please visit: https://shelly-api-docs.shelly.
cloud/#shelly-family-overview.
Shelly® devices are delivered with facto-
ry-installed firmware. If firmware updates
are necessary to keep the devices in con-
formity, including security updates, Allterco
Robotics EOOD will provide the updates free
of charge through the device embedded
Web Interface or Shelly Mobile Application,
where the information about the current
firmware version is available. The choice to
install or not the Device firmware updates is
User's sole responsibility. Allterco Robotics
EOOD shall not be liable for any lack of con-
formity of the Device caused by failure of
the User to install the provided updates in a
timely manner.
WHAT IS SHELLY MOTION 2
Shelly Motion 2 (the Device) is a high-sen-
sitivity, ultra-low power consumption Wi-Fi
motion sensor, which also features light
4
User and Safety guide