Source key 8
Undefined 9
Home button 10
Confirm key 11
Undefined 12
Note: Short press the "focus" button to enter "electric focus", long press the "focus" button to
enter "auto focus".
Remote control pairing
This machine uses a Bluetooth remote control. The remote control must be paired with this
machine before it can be used normally. When the machine is turned on for the first time, if the
main unit is not paired with the remote control, please follow the steps below to pair.
Press the "Power" button on the main unit to start the machine, move the remote control as
close as possible to the main unit, and press the "Menu" and "Volume Down" keys at the same
time for more than three seconds. When the indicator of the remote control flashes quickly, let
go and wait, and "Pairing" appears on the screen. "Success" prompt means that the pairing is
successful. If the pairing fails, please retry again.
Optical mouse function
Enter the optical mouse function: After the pairing is successful, shake the remote control to
bring up the optical mouse arrow. After moving the mouse arrow to the target position, press
the "confirm" key to confirm the operation.
Exit the optical mouse function: Shake the remote control to exit the optical mouse state; or let
the remote control idle for more than ten seconds to automatically exit the optical mouse.
5. On/Off
Power on: When the device is turned off, after correctly connecting the power cord, lightly
press the "Power" button on the device or the "Power" button on the remote control to turn on
the device.
Shut down: When the device is running, press the "Power" button on the body or the "Power"
button on the remote control, and the device will enter standby mode.
6. Focus
Auto Focus:
Method one: Long press the "focus" button to activate the "auto focus" function.
Method 2: Long press the "Menu" button on the remote control -> Select "Display Settings" ->
Select "Focus Mode" -> Select "Auto" -> When the device moves, the picture will automatically
adjust to clear.
Motorized focus:
① Turn on the "Motorized focus" func on: short press the "focus" key or follow the steps
below, long press the remote control "menu" key -> select "display settings" -> select "focus
mode" -> select "manual ";
8
9
10
11
12