Setting The Channels; Noise Elimination - Citizen JVHS3987D Manuel D'instructions

SETTING THE CHANNELS

This VCR is equipped with a channel memory
feature which allows channels to skip up or down
to the next channel set into memory, skipping over
unwanted channels. Before selecting channels,
they must be programmed into the VCR's memory.
In addition to normal VHF and UHF channels, this
VCR can receive up to 113 Cable TV channels. To
use this VCR with an antenna, set the TV/CATV
menu option to the TV mode. When shipped from
the factory, this menu option is in the CATV mode.
TV/CATV SELECTION
1
Press the MENU button.
2
Press the TRACKING SET + or –
button to select the CH SETUP
option, then press the ENTER
button.
3
Press the TRACKING SET + or –
button to select the TV/CATV mode.
4
Press the ENTER button to select
the TV or CATV mode. The arrow
indicates the selected mode.
TV - VHF/UHF channels
CATV - CABLE TV channels
5
Press the MENU button twice to return to normal TV viewing.
TV/CATV MODE SELECTION
When shipped from the factory, the TV/CATV menu option is set to the
"CATV"(Cable Television) mode.
If not using CATV, set this menu option to the "TV" position.
AUTOMATIC MEMORY TUNING
The VCR can receive a maximum of 181 channels by
presetting the channels into memory.
CHECK BEFORE YOU BEGIN
• Turn ON the TV and set to the video channel 3 or 4.
• Turn ON the VCR POWER button.
• Press the TV/VCR selector button to select the VCR mode.
When a TV is connected with an audio/video cable, turn the
TV on and select the video input mode on the TV.
1
Press the MENU button.
Press the TRACKING SET +
or button to select the CH
–
SETUP option, then press the
ENTER button.
2
Press the TRACKING SET +
or button to select the
–
AUTO CH MEMORY mode,
then press the ENTER button.
3
The auto tuning will start. The
channel display will count up
and when finished, the screen
returns to normal.
16
TO ADD/DELETE CHANNELS
1
Press the MENU button.
Press the TRACKING SET +
or
SETUP option, then press the
ENTER button.
2
Press the TRACKING SET + or
–
LETE mode, then press the
ENTER button.
3
Select the desired channels to
MENU
TIMER REC SET
be added or deleted using the
AUTO REPEAT ON OFF
CH SETUP
SYSTEM SETUP
TRACKING SET + or – button.
4
Press the ENTER button if you
+/-/ENTER/MENU
á ñ
wish to DELETE the channel
CH SETUP from memory.
TV CATV
Press the ENTER button if
AUTO CH MEMORY
ADD/DELETE
you wish to ADD the
unmemorized channel.
+/-/ENTER/MENU
á ñ
Repeat Steps 3 and 4 for each channel to be added
or deleted.
5
Press the MENU button three times after adding or
deleting all of the desired channels, to return to
normal TV viewing.

NOISE ELIMINATION

When you don't want to receive a weak signal
broadcast, the Blue Back Screen can be obtained by
selecting the NO NOISE BACKGROUND "ON". When
the unit is shipped from the factory, the NO NOISE
BACKGROUND is set to the "ON".
CHECK BEFORE YOU BEGIN
• Turn ON the TV and set to the video channel 3 or 4.
• Turn ON the VCR POWER button.
• Press the TV/VCR selector button to select the VCR
mode.
MENU
TIMER REC SET
AUTO REPEAT ON OFF
CH SETUP When a TV is connected with an audio/video cable,
SYSTEM SETUP
turn the TV on and select the video input mode on the
TV.
+/-/ENTER/MENU
á ñ
1
Press the MENU button, then
CH SETUP
press the TRACKING SET + or
TV CATV
AUTO CH MEMORY
–
ADD/DELETE
SETUP option. Then press
ENTER.
+/-/ENTER/MENU
á ñ
2
Press the TRACKING SET + or
+0
–
NOISE BACKGROUND option.
3
Press the ENTER button to
select the ON position.
4
Press the MENU button twice
to return to normal TV viewing.
– button to select the CH
button to select the ADD/DE-
button to select the SYSTEM
button to select the NO
MENU
TIMER REC SET
AUTO REPEAT ON OFF
CH SETUP
SYSTEM SETUP
+/-/ENTER/MENU
á ñ
CH SETUP
TV CATV
AUTO CH MEMORY
ADD/DELETE
+/-/ENTER/MENU
á ñ
ADD CH 003
+/-/0-9/ENTER/MENU
á ñ
MENU
TIMER REC SET
ON OFF
AUTO REPEAT
CH SETUP
SYSTEM SETUP
+/-/ENTER/MENU
á ñ
SYSTEM SETUP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
+/-/ENTER/MENU
á ñ