GNC Power Moon Manuel D'installation, D'utilisation Et De Maintenance page 12

ENG
DAY SETTING MENU
Using the keys to increase (+) and decrease (-), set the intensity of the white LED
channel you want to have in the phase of the day. If not used, set this percentage to
zero.
Using the on / off switches, select the outputs to be associated with the white chan-
nel. If all switches remain off, no channel will be associated with white.
Using keys to increase (+) and decrease (-), set the intensity of the blue LED channel
you want to have in the phase of the day. If not used, set this percentage to zero.
Using the on / off switches, select the outputs to be associated with the blue chan-
nel. If all switches remain off, no channel will be associated with blue.
Set the hours and minutes of the sunrise start time using keys to increase (+) and
decrease (-)
Set the duration of the sunrise ramp in minutes, using keys to increase (+) and de-
crease (-)
Three optional sets to set changes in brightness levels at three different times wi-
thin the time of day
Activate any set using the on / off switch.
A drop-down menu for settings will be proposed
Set the hours and minutes of the set start time using keys to increase (+) and de-
crease (-)
Using keys to increase (+) and decrease (-), set the intensity of the white LED chan-
nel you want to have in the phase of this set
Using keys to increase (+) and decrease (-), set the intensity of the blue LED channel
you want to have in the phase of this set
Possibility to independently set two additional brightness sets.
Each set is optional and independent of the others
Press the save icon to store the data entered