Ga.Ma INNOVA STEAM Mode D'emploi page 12

INNOVA STEAM
IMPORTANT: THE APPLIANCE IS TO BE USED ON COMPLETELY DRY HAIR. DO NOT REMOVE THE
WATER RESERVOIR IF THE PRODUCT IS STILL HOT OR PLUGGED INTO THE POWER OUTLET. DO
NOT ACTIVATE THE MICRO STEAM FUNCTION IF THE WATER RESERVOIR IS EMPTY.
USE INSTRUCTIONS:
To use the appliance without activating the micro steam function, read from point 5 to point 7.
• To remove the water reservoir, move the opening switch downward and hold it down until the reservoir has
been completely removed.
• Open the rubber cover found on the back of the reservoir in order to fill it with water. Only use clean water.
• Close the reservoir and make sure that no water leaks out.
• Insert the reservoir into its special compartment, moving the opening switch downward and holding it down;
release the switch as soon as the reservoir is perfectly positioned.
• Plug the appliance into the power outlet.
• Turn on the appliance by pressing the
130°C. Note however that the appliance automatically detects the temperature of the surrounding environment
and therefore it will decrease by a few degrees before gradually reaching 130°C.
• Use the (<) and (>) buttons to select the desired working temperature: the digital display will show information
about temperature progress. The heating element is capable of working from 130°C up to 230°C.
• To activate the micro steam function, wait for the appliance to reach the desired temperature and move the
switch towards
• Turn off the appliance by pressing the
• Unplug the appliance from the power outlet and let it cool down; then empty the water reservoir, repeating
the same procedure explained beforehand.
• If the hair straightener has been used with the micro-steam function, once switched off, the steam will
continue to come out until the straightener has cooled down.
• Put the appliance back in its box.
; the LED will automatically light up and the function will be activated.
button. The digital display will initially show a temperature of
button.
11