Installation
7) Install wall elbow (R) and
escutcheon (S) to pipe fitting.
Turn clockwise to secure.
R
S
Option: Place mounting plate (Q) in
position, mark and drill 3/16" holes
into wall. Install anchors.
Q
8) Place mounting plate (Q) in
position, mark and drill 1/8" pilot
holes into stud.
Q
9) Remove cover of hand show-
er cradle (O). Install cradle and
mounting plate (Q). Secure with
three screws (P). Replace cover
on hand shower cradle.
O
P
10) Attach shower arm (B) and
flange (C) to vertical shower pipe
turning clockwise to tighten.
C
B
5
11) Install showerhead (A) to
shower arm (B) turning clock-
wise to tighten.
Q
12) Attach large end of hand shower
hose (U) to hand shower (N).
Attach small end of hand shower
hose (U) to wall elbow (R). Turn
clockwise to tighten.
1
U
R
U
B
A
N
2
3
4