Symmons Elm Serie Manuel D'utilisation Et De Maintenance page 4

Installation
Note:
For valve body installation, please
see valve body installation guides.
1) Install mounting plate (H) to di-
verter valve (5505 diverter valve =
2DIV-BODY, 5506 diverter valve =
3DIV-BODY) and mounting plate (K)
to shower valve (4000-BODY).
Secure each with two screws (G,J).
G
H
K
J
2) Attach diverter escutcheon (F) to
mounting plate (H).
F
H
Note: Tabs should snap into place
3) Attach shower escutcheon (I) to
mounting plate (K).
I
Note: Tabs should snap into place
4) Install dome covers (E) to valves
by turning clockwise.
E
E
.
4
5) Install diverter handle (D) and
shower handle (V) to valves.
Secure handles by tightening set
screws.
K
D
.
V
Notes: Part number T-02032 is
marked on back of diverter handle.
Handles should be facing the 6
o'clock position.
6) Install tub spout escutcheon (M)
and tub spout (L) to pipe fitting.
Turn clockwise to secure.
L
2
M