Scanning - Philips SIC4014H/G7 Manuel D'utilisation

Scanning

1. Press and hold
Note: message appears on the screen if no card is inserted.
CARD
2. Select (Setting) >
direction to Up or Down.
3. Place the scanner fl at against the document with the scanning lens facing
down. Make sure the area you want to scan is between the Alignment
guides.
4. Press Power/Scan button to activate the Scan. The
icon appears.
5. Follow the arrow indication on the LCD screen to
slowly slide the scanner up or down and keep your
hand stable to get the best quality picture.
6. To stop scanning, press
The scanned image will show on the screen and save
to the memory card automatically.
7. To start a new scan, repeat the steps 3~6.
Note:
• The progress bar status during the scanning:
Green
Orange
Exclamation mark Unsuccessful scan. Please re-scan.
Helpful Hints:
• Scan at a slow and constant speed to optimize scan quality.
• When scanning books or magazines, begin scan from the bind and glide
outward.
Power/Scan button to turn on the power.
(Scan Setting) > Direction to set the scan
SCAN
Power/Scan button again.
Good scan.
Poor scan. Lower the scan speed.
5
Scanning
/ scanning
Scanning