Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Installation / Warranty
REPLACING OLD SEALAND OR DOMETIC VENT FILTER
For installations with 5/8-inch or 3/4-inch (16 mm or 19 mm) ID hose threaded fittings (fig .
3, p . 2) already attached to vent hose:
1 . Make sure rubber gaskets (not provided) are inside threaded fittings at hose ends .
2 . Lightly lubricate O-rings on each end of filter cartridge with silicone grease .
3 . Remove red plugs from each end of filter cartridge .
4 . Use retaining fasteners (fig .
end of filter cartridge . Be sure to push hose adapters completely over O-rings before threading
the retaining fasteners to the filter .
5 . Press ECO vent filter (fig .
6 . Attach threaded hose fittings to threaded adapters (fig .
1/4 to 1/2 turn beyond hand tight .
For installations with 5/8-inch, 3/4-inch, 1-inch or 1.5-inch ID vent hose and clamped
connection to vent filter:
1 . Lightly lubricate O-rings on each end of filter cartridge with silicone grease .
2 . Remove red plugs from each end of filter cartridge .
3 . Use retaining fasteners (fig .
2) to filter cartridge . Be sure to push hose adapters completely over O-rings before threading
the retaining fasteners to the filter . Refer to Adapter Size Chart (p . 3) to identify correct size
hose adapter to use with existing vent hose ID size .
4 . Press ECO vent filter (fig .
5 . Using hose clamps (not included), attach vent hoses to adapters that are connected to vent
filter .
Caution!
Do not use ECO Vent Filter for holding tanks with waste that is treated through on-
board sewage treatment systems that use chlorine or other strong oxidizing agents .
Caution!
Replace vent filter immediately if accidental overflow of holding tank occurs .
Note
Replace vent filter at the beginning of each boating season for best odor control .
5

Warranty

North America and Rest of the World:
Manufacturer's One-Year Limited Warranty
Dometic Corporation, Sanitation Division warrants to the original purchaser only that this product,
if used for personal, family or household purposes, is free from defects in material and workman-
ship for a period of one year from the date of purchase .
If this Dometic product is placed in commercial or business use, it will be warranted to the original
purchaser to be free of defects in material and workmanship for a period of only ninety (90) days
from the date of purchase .
(continued on next page)
6
4, p . 2) to attach threaded adapters (fig .
3
6, p . 2) into mounting bracket so that it clicks into bracket arms .
3
4, p . 2) to attach correct size hose adapters (fig .
3
6, p . 2) into mounting bracket so that it clicks into bracket arms .
3
ECO Vent Filter
5a, p . 2) to each
3
5a, p . 2) on filter cartridge . Tighten
3
3
5b or 5c, p .
3

Publicité

Chapitres

Table des Matières
loading

Table des Matières