Publicité
Les langues disponibles
Les langues disponibles
No
Ports
8
Alarm Input
9
HDMI Output
10
USB Interface
11
Power Supply (AC)
12
Power Supply (DC)
13
Power Switch
14
RS485 Interface
15
RS232 Interface
16
eSATA Interface
12V Power
17
Output
Installation Requirements
* Installation and removal of the device and its accessories must be carried out by quali ed
personnel.
* Store or use the device in a proper environment that meets environmental requirements, including
and not limited to, temperature, humidity, dust, corrosive gases, electromagnetic radiation, etc.
* Make sure the device is securely installed or placed on a at surface to prevent falling.
* Unless otherwise speci ed, do not stack devices.
* Ensure good ventilation in the operating environment. Do not cover the vents on the device. Allow
adequate space for ventilation.
* Protect the device from liquid of any kind.
* Make sure the power supply provides a stable voltage that meets the power requirements of the
device. Make sure the power supply's output power exceeds the total maximum power of all the
connected devices.
* Ground the device properly.
* Using the device may involve the collection of personal information such as face, ngerprint, license
plate number, email, phone number, GPS. Please abide by your local laws and regulations while using
the device.
10
Description
Input alarm signal.
Output high de nition audio and video signal.
Connect to peripheral USB storage device, mouse and etc.
Connect AC 100-240V power.
Connect DC 12V power.
Turning on/o the NVR.
Connect to the external devices such as PTZ cameras.
It is for general COM debug to con gure IP address or transfer
transparent COM data.
Connect external SATA HDD.
Provide power to some peripheral devices such as camera and
alarm device.
Publicité
