GTV LD-DIMLED-10 Mode D'emploi page 2

USER MANUAL
EN
LED Jacky Dimmer Switch Manual
LD-DIMLED-10
Before installation please read the manual carefully.
Designation:
•
The dimmer switch is designed for use with any LED light source powered with a constant voltage
between 12 V DC and 24 V DC and of total load not exceeding 8 A.
•
The dimmer switch enables the user to obtain any light intensity of the LED receiver (dimming,
brightening) as well as remote
switching on and off.
Characteristics:
•
Power supply 12 V DC/ 24 V DC.
•
Power 12 V DC - 90 W.
•
Power 24 V DC - 180 W.
•
Maximum current load 8 A.
•
Protection rating of IP20.
•
Work temperature: +10°C / +50°C.
•
Communication with the remote controller - radio (RF).
•
Remote controller range - max. 50 m (dependant on the ambient conditions).
•
Brightness of light adjustment range: 0 - 100%.
•
Individual remote controller frequency.
Advantages:
•
Radio wave communication between the remote controller and the dimmer up to 50 m.
•
Switching the light source on / off.
•
Light source adjustment range: 0 - 100%.
Assembly instructions:
•
For operation of the device it is necessary to connect a LED 12 V DC/ 24 V DC transformer.
Connection method:
Input
IP20
The product complies with the requirements of EU Directives and their transpositions into the national law. See the website at www.gtv.com.pl and the Declarations of Conformity for detailed information.
12V DC/ 24V DC
transformer
LED stripe
max
8 A IR IR
0-100%
MAX 50 m
individual frequency
0-100%
IR
MAX 50 m
GTV, ul. Przejazdowa 21, 05-800 Pruszków; phone: 0048 22 444 75 00; fax: 0048 22 444 75 03; wwww.gtv.com.pl
Output
Remote control functions:
a b c
a) Switching on / off
b) Dimming (adjustment of mean power)
c) Brightening (adjustment of mean power)