HoMedics MyChill PAC-30 Mode D'emploi page 11

REPLACING THE COOLING MEDIA
5. Replace the Top Cover onto the
water reservoir.
7. Plug the Power Adaptor into the back
of the unit and the other end into a
120 volt AC electrical outlet to resume
operation.
6. Refill the Water Tank and
Reservoir as described in the
"How to Fill" section.
COOLING MEDIA
RESET BUTTON
8. Turn the unit on, then press and
hold the Cooling Media Reset
Button for 5 seconds. The LED
will flash to indicate the Replace
Cooling Media Timer has been
reset.
11