ALZA WIFI SMART SWITCH MS-101 Manuel De L'utilisateur page 7

4.3 Light wiring instruction.
*Note: The WiFi switch must be powered up by N and L wires.
5. Press and hold the button for about 7 seconds until the WiFi green LED blinks
fast.
Cover
6. Enter the App, tap "+"in the upper right of the page to enter network connection
page.
7. There are two network connection methods (Normal mode and AP mode).
Normal mode is default. Users could tap the upper right corner to switch the
connection method to AP mode.
Pairing button
Manual Switchg
7
WiFi LED
On/Off LED