English - Huntloc HLT-4.5 Manuel De L'utilisateur

4

ENGLISH

Thank you for choosing to use our tracking device. In order to use the
tracker, the Huntloc hunter app, the LiveTeam teamwork app or the Doglo
dog monitoring app needs to be downloaded to the user's smartphone
(hereinafter referred to as the Traxby app). A user can use multiple apps
on their smart device at the same time. The Traxby apps are available for
Android and iOS operating systems, being freely downloadable from App
Store / Google Play.
BATTERY CHARGE
Before first use, you must charge the battery. To charge tracker, use the
Qi wireless charging pad.
1. To begin charging, connect charging pad into mains power supply
using the microUSB cable. The charging pad's led indicator should start
blinking.
2. Place the tracker on the charging pad. The red led on the tracker should
start blinking and the charging pad's led indicator should change color.
3. When the tracker's battery is full, the red led will remain on.
4. To turn the tracker on, place the tracker on the charging pad, blue LED
start will blinking.
SIGNAL LAMPS OF TRACKER
(see pic. on page 2)
1. GREEN (GPS)
blinking:
ON:
2. BLUE (GSM)
blinking fast:
blinking slow:
ENGLISH
searching for satellite
position is located
searching for GSM
standby mode