Télécharger Imprimer la page

Tenergy DQ1007 Mode D'emploi page 8

Publicité

Les langues disponibles

Les langues disponibles

Specifications
Product Width (in.): 9
Product Depth (in.): 5.25
Product Height (in.): 14
Voltage (volts): 120
Amperage (amps): 12.5
Max Wattage (watts): 1500
Area Heated (Sq. Ft.): Approx. 170
Heat Settings: Low Heat(750W), High Heat(1500W), Fan-only
Heater Element: Resistance Wire
Heater Controls: Dial
Indoor/Outdoor: Indoor
Portable Heater Features: Front-in Air Recycling, Thermostat,
Tip-over Protection, Over-heat Protection
Product Weight (lb.): 5.2
Cord Length (in.): 72
Certifications and Listings: ETL
Trouble Shooting
- Check if the power cord is plugged into an electrical outlet, if not, plug in.
- Check if electricity to the main fuse is working properly.
- The thermostat might be set too low. Turn the Thermostat Control clockwise
until the heater begins working.
- Make sure the electrical outlet or circuit breaker is working properly.
- Check for obstructions. If obstruction occurs, turn the heater OFF and
UNPLUG THE UNIT. Carefully remove all obstruction before using the unit again.

Publicité

loading

Ce manuel est également adapté pour:

59119