Publicité
Les langues disponibles
Les langues disponibles
C: When the indicator lights flicker all the time, buzzer doesn't
•
give an alarm and all buttons pressed useless, it means the
temperature sensor has a problem. Please disconnect the
power supply and plug in again. If such problem still exists,
please stop to use it and send it for after-sales repairing.
6.
WARNING Electric Shock Hazard.
Do not immerse kettle, power base, or plug in water or any other
liquid.
With kettle unplugged, empty any remaining water and rinse. Allow
kettle to cool. The mesh filter may be removed by pulling up on the
filter tab which is visible through the kettle opening.
Cleaning & Maintenance
1. Always disconnect the plug from the outlet before cleaning the
kettle and the base. Wipe the kettle and the base with a moist
cloth and a drop of washing-up liquid. Never use an aggressive
scouring or steel wool.
2. Descale the kettle regularly, possibly once a week, it depends on
the hardness of the water and the frequency of use. Scale
diminishes significantly the heating performance of the kettle.
3. To descale fill half the kettle with water and the other half with
vinegar. Bring to the boil and then leave it to stand overnight.
Next day pour away and fill the kettle with fresh water and bring
to the boil again. This water must also be poured away.
4. Normal commercial descales for kettles can also be used. Follow
the instructions for the respective descale.
EN-10
Publicité
